ZP-3040 Zero Paints Gloss Clearcoat Lacquer 60ml
€9.49
DESCRIPTION
Dries clear even over white!
Instructions for use :
Leave the basecoat colour for 15/30 minutes before applying clearcoat, then apply 1 mist (tack) coat, after 5/10 mins you can apply further coats (we recommended a minimum of 2 single coats allowing 5-10 mins between each), if required you can build up multiple layer to suit your required level of gloss/shine
Air Drying Times at 20ºC,
Dust Dry : 30-40 mins
Touch Dry : 4 Hrs
Full Hardness : 24 Hours,
Thoroughly Dry : 48 Hours. Can be polished after 48 hours at 20ºC
**Do not use over waterbased colour coats
Shelf Life : at least 2 years if stored in tightly closed original containers at cool temperatures.
Decals : So far we have found that the pre-thinned clearcoat is safe over all major brands of Decals like, Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport etc. but please test on cheaper inkjet printed decals first
Always apply light mist coats over decals NEVER go straight on with wet coats, this could melt the decals
All Zero Paints dry matt and require clearcoating unless otherwise specifiedApplication Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 – 40 psi, Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it’s best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable. |
 |
Health and Safety Notes :Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here -> |
Availability: 1 in stock
